The
Aspiring

Tiny Home on Wheels

The Aspiring Tiny Home is designed for the family in mind, but it also lends itself well as an Airbnb. The main selling point of the Aspiring is the downstairs with fitted bunkbeds and fold a way desk Upstairs boasts a huge 4.5m long mezzanine level for the parents which leaves plenty of room for storage, or a second TV area. Downstairs kitchen is well laid out with barn door, leaving space for storage in the wall space. There is space for a full-size fridge and plenty of storage under the stairs to the mezzanine level. The lounge area is fitted out with custom storage couches that wrap around the room.


The Aspiring is 7.8m long, 2.5m wide and weighs in under the legal limit of 3,500KG. It can be towed by most recent model full-size Utes.


As with all our Tiny Home designs, we have never made the same model twice, as our clients add, change and modify the layout they like the best to create their perfect dream Tiny Home.

Purchase Options

$94,800 inc GST

Specifications

Size - 27m2, 7.8m x 2.5m, footprint; roof height 3.5m internal to apex, 4.2m external to apex. Mezzanine area of 2.4m x 2.5m, with 2m clearance below. Effective floor area of 27m2, including mezzanines.

Flooring

Timber style vinyl sheet, various colour choices available. 10 year warranty.

Joinery

Brand new, double-glazed, made by Origin Windows.

Guttering and Spouting

Colour-matched Marley Stormcloud guttering system, featuring over-sized 80mm downspout.

Electrical

8x double outlets (three have USB plugs), LED recessed and pendent interior downlights, and exterior light with motion sensor. RCD protected and 'caravan connection' . Comes with individual Certificate of Compliance and Electrical Warrant of Fitness (EWOF).

Alarms

Hard wired combined Gas and Carbon Monoxide Alarm, and 10 Year Photoelectric Smoke Alarm.

Kitchen

Kitchen made in house from high end Birch clear finished ply as standard, built in Rangehood, Kwila Benchtops, three sets of cupboards, one set of draws, wall shelves, stainless steel sink, mixer tap, two power outlets.

Delivery

Can be delivered anywhere on the North or South Island.

Construction

All our Tiny Houses are designed from full 90mm galvanised steel framing which will not warp, hold moisture or rot. Its stronger and lighter than timber framing and unlike timber, is completely recyclable.

Trailer

Standard Duragalv, or upgrade to hot dipped galvanised, twin or triple axle trailer, built in corner house jacks, spare wheel, registered, and 3-year Warrant of Fitness.

Roofing

Coloursteel, trapezoid profile.

Cladding

Our standard is Coloursteel corrugate profile, vertically fixed, but we can offer a range of cladding.

Exterior Fixings

Stainless steel or galvanized as required.

Insulation

Floor – R1.4, Walls – R2.4, Ceilings – R3.9. For the steel framing thermal break, we go to ‘best practice’ above code and sheet the entire Tiny House with 10mm Expol polystyrene rather than the cheaper method of battens. All insulation is above NZ Building Code and the new Residential Tenancies Act standards, including the South Island and Alpine zone.

Bathroom

900 x 760 shower with showerdome to keep steam in, flushing toilet (other toilet options available) 460 x 220 to ground vanity, mirror, power outlet, powered vent to outside.

Hot Water

16L Rheem LPG Gas Califont on demand hot water heater. All plumbing installed by a licenced plumber.

Builders

Built by a team lead by Adam Fox, NZ Licenced Building Practitioner.

For roofing and cladding, ‘Coloursteel Endura’ coating is standard, but we recommend upgrading to ‘Coloursteel MAXX’ for costal environments.

Talk to us about a custom design. Because every Tiny House is custom made to your specifications, we can adapt colours, windows, doors, interior linings, flooring, create off grid, and much more.

Contact our team now on 07-788-0101 or by using our contact form.